Are you in need of draining a waterbed? If so, this guide is for you! By following the instructions outlined in this article, you will be able to drain your waterbed quickly and easily.
Before getting started, make sure that all the protective covering is taken off of the mattress – this includes the mattress cover and the mattress pad.
Some tips that might make your job easier are to position the hose low enough so that water doesn’t flow back into the bed while draining it, and to use a vacuum cleaner with a large dustbin. So there you have it – a complete guide on how to drain a waterbed with a shop vac!
So without further ado let’s get started!
Why Do You Need To Drain A Waterbed?
It’s time to say goodbye to your waterbed’s wet, smelly, and uncomfortable mattress! By following the proper steps for draining a waterbed, you can avoid any problems.
Here are the steps you need to take:
- Remove the waterbed mattress and cover
- Disconnect the waterbed hose
- Open the waterbed drain valve and place the shop vac over the opening
- Turn on the shop vac and wait until the waterbed is full of water before closing the valve.
That’s it! Now you’re ready to enjoy a dry, comfortable mattress that’s free of bacteria and mold. That’s why you need to drain a waterbed.
You can do this by using a shop vac or by using a suction hose attachment. Whichever method you choose, make sure to follow the instructions carefully to avoid any damage!
How To Drain A Waterbed With A Shop Vac? – The Complete Guide
Here are some steps to do this easily and safely.
1. Take Out All The Protective Covering From The Mattress
- A waterbed can be a great addition to your home, but it can also be a nightmare if it’s not properly drained. Don’t wait until there’s a major flood – take action now!
- The first step is to remove all the protective covering from the mattress. This includes the mattress cover, mattress pad, and any other covers.
- Make sure to clean out any remaining water and debris before sealing it up again.
- Next, use a shop vac to suck up all the water and debris in the bed. This will help avoid a major flood down the road.
2. Ensure That Your Waterbed Heater Is Unplugged Before Draining The Bed
- First, unplug the waterbed heater if it’s plugged in.
- Next, open one of the side panels (it should have a handle) and remove both clamps that hold down each end of the straps on either side of the bed frame assembly. Be sure to note the location of the drain hose as you remove the panel, as you’ll need it later.
- Finally, turn off all electrical sources – including the waterbed’s main power switch – and disconnect any hoses leading from the drain pipe.
- With one person holding down each end of the strap while someone holds onto the top clamp on the side panel, carefully pull the panel out as closely to the edge of the mattress as possible, making sure not to pinch cables or rip vinyl coverings.
3. Find The Fill And Drain Valve Of The Bed
- First, open up your shop vac as much as possible without dumping everything out.
- Next, place the intake tube over the fill valve opening on the waterbed frame.
- Hold down the release button until the machine starts to suck. When the machine becomes quiet, carefully remove the intake hose from the frame mark center vacuum line at the top.
- That’s it! Next, remove the cover over the pump by unscrewing two screws on each side of it.
- Finally, locate the power supply for the bed and turn it off. Disconnect all hoses from around the pump. Now you are ready to drain your waterbed!
4. Replace The Cap
There’s no need to fret if your waterbed is slowly draining – this guide will teach you how to drain it with the help of a shop vac.
- First, be sure to replace the cap if it’s missing. Then, follow the instructions below to unscrew and remove the springs and attachments on each side of the bed frame.
- Be sure to take note of the hose locations – you’ll need to plug the waterbed back in and replace the hoses once the draining is complete.
- Finally, if the waterbed doesn’t have a built-in pump, you’ll need to replace the cap before draining it.
5. Position Your Hose
Drain your waterbed this season with the help of a shop vac! Follow these simple steps to get the job done right:
- Position your hose so that the suction end is over the drainage hole in the bed and turn on the vacuum cleaner.
- Lean rags or towels into the waterbed and let the vacuum do its job.
- If there are any objects blocking the way of water flow – like furniture – move them out of the way before attempting to empty your waterbed.
- Once all liquid has been drained from your bed, use a clean rag or towel to dry it off completely before storing away for next year!
- To drain a waterbed, you’ll need the following: 6. Ose with adjustable nozzle (or “suction”)
- Once all liquid has been drained from your bed, use a clean rag or towel to dry it off completely before storing away for next year!
7. Check Back Inside, Then Plug The Waterbed Adapter To The Hose
Drainage is the key to a healthy waterbed, so it’s important to do it on a regular basis.
- First, disconnect all cables and hoses from the waterbed.
- Next, connect one end of the hose to a hole in either side of the waterbed adapter, making sure the hose is not kinked.
- Open both ends of the shop vac hose, making sure they are not kinked. Make sure the power is off to the waterbed before proceeding.
- Finally, close up both ends of the shop vac hose and turn on your vacuum cleaner. You’re done!
Tips For Making Your Job Easier
Drainage season is officially here, and that means waterbed draining time! Whether you’re a first timer or a pro, following these simple tips will make the process much easier.
First, make sure everything has been cleaned and dried before beginning to drain the waterbed.
Second, buy a shop vac with a hose attachment – this will make the job a lot faster and easier.
Third, make sure the waterbed is clean and dry before beginning to drain it. Open up all of the drains in the bed and place the vacuum over them, turning it on to full capacity.
Lastly, once the waterbed is drained, replace any plugs or seals that may have been damaged during draining. Congrats – you’ve successfully completed your draining job!
Conclusion
After reading this comprehensive guide, you will know everything you need to know to drain your waterbed without any hassle.
Keep in mind that draining a waterbed is a process that should be done as a step-by-step process in order to avoid any complications.
Follow the instructions outlined in the guide and you will be draining your waterbed in no time! If you have any questions or comments, please feel free to leave them below and we’ll get back to you as soon as possible. Thank you for reading!
Frequently Asked Questions
How do you remove water from a waterbed with a shop vac?
If your waterbed has been heavily wetted, it may be time to call in the professionals. This means that the mattress is saturated and unable to hold the weight of a person or animal.
Professionals can use a waterbed dryer or the ULTRA wet method to remove the water. The manual way is by manually sucking all of the water out from under and around the mattress with a shop vac hose attachment.
There are a few ways to drain waterbeds using a shop vac: the manual way, the ULTRA wet method, and the bed dryer. The bed dryer is pretty self explanatory – place your mattress on top of an air conditioning unit or inside out freezer for about 24 hours.
Does it matter if I remove the pump first or leave it in place and use the shop vac on top of it?
It always pays to remove the pump first before using the shop vac on top of it. This will minimize damage done and make sure that the vacuum is working as intended.
If you leave the pump in place, make sure to open up all air vents and turn off the electricity before plugging in the shop vac.
Can I use my own vacuum cleaner instead, or would that be too dangerous to use near an electrical outlet and waterbed?
There is no definitive answer to this question as it depends on the specific vacuum cleaner you are using and the water bed you are draining.
However, the safest way to proceed is to turn off all unnecessary appliances in the house before vacuuming, wear gloves and eye protection when working with the vacuum cleaner, and make sure that the power cord and plug are long enough so that you can reach all areas of the waterbed.
How much time will it take to drain my waterbed?
It will take about 30 minutes to drain your waterbed, depending on the size and shape of the mattress.
After draining the mattress, it’s recommended to vacuum the entire mattress using a machine with a hose attachment.